So you have started working with home automation and you have some light setup and turning on/off from time to time. Here are some tips and examples of ways to make sure they not only turn on at the right time, but they don’t turn off when they shouldn’t!
If you use openHAB, Home Assistant, Smartthings or one of the other home automation hubs, these simple rules and concepts can make sure that your home automation lighting works the way you want it too.
—- Items I use all the time for my Home Automation —-
Z-Wave Stick Hardware – http://geni.us/AAuj
Raspberry Pi – http://geni.us/tqi8aJ8
Raspberry Pi Starter Kit – http://geni.us/uzEZ
Smartthings V2 HUB – http://geni.us/0d5sjq
Wink Hub – http://geni.us/c4Yb8lZ
Vera Hub – http://geni.us/2axB3iV
—-My Camera Video Gear —-
Sony A6500 – http://geni.us/K7TXY
Smallrig Cage for Sony A6500 – http://geni.us/0iRLAhf
Sony 10-18mm Wide-Angle Zoom Lens – http://geni.us/Aw3QQp
Rode VideoMic – http://geni.us/06mh26