Home Automation systems often add a great deal of convenience, but sometimes its simple to forget that we need to do things manually sometimes too! Forget pulling out a smartphone to turn on some lights, we need a simple way to add manual functionality to the smartest of smart home automation.
This is where the z-wave WallMote from Aeotec come’s in. This is a small square device that mounts to any surface using magnets. This switch comes in a dual or quad mode switch which using different gestures can offer up to 16 scenes and add simple increase/decrease control to systems like Sonos.
Because its a z-wave device, its super simple to setup in home automation systems like Smartthings, Wink, openHAB or Home Assistant. Of course if you are using an opensource system you will need a Aeotec Z-Stick as well as part of your network.
Check out this full review of the Aeotec Z-Wave WallMote Quad with a demo of simple setup in openHAB.
Get yours today!
Aeotec by Aeon Labs ZW130-A WallMote Quad – http://geni.us/vRq6icq
Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway – http://geni.us/AAuj
—- Items I use all the time for my Home Automation —-
Z-Wave Stick Hardware – http://geni.us/AAuj
Raspberry Pi – http://geni.us/tqi8aJ8
Raspberry Pi Starter Kit – http://geni.us/uzEZ
Smartthings V2 HUB – http://geni.us/0d5sjq
Wink Hub – http://geni.us/c4Yb8lZ
Vera Hub – http://geni.us/2axB3iV
—-My Camera Video Gear —-
Sony A6500 – http://geni.us/K7TXY
Smallrig Cage for Sony A6500 – http://geni.us/0iRLAhf
Sony 10-18mm Wide-Angle Zoom Lens – http://geni.us/Aw3QQp
Rode VideoMic – http://geni.us/06mh26